Official Luthiers Forum!
http://www-.luthiersforum.com/forum/

Neck set and fitting
http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=10465
Page 1 of 1

Author:  af_one [ Fri Jan 19, 2007 5:20 am ]
Post subject: 

Anyone know of any good on-line pics and descriptions of setting a dovetail neck? Pics where the angle shows where a straitedge shoould hit teh bridge etc?

Author:  Bill Greene [ Fri Jan 19, 2007 6:16 am ]
Post subject: 

Hi, again, I think (if this is Ken):

Do a search of the archives, using a phrase, and put in "setting the neck". You'll get lots of threads to read, and some do have photos.

Also, consider looking at the construction section at www.marioproulx.com   Mario has some good info, about 6-7 pages into the process, of how to set the neck angle, or at least one of the neck angles. Go to www.hoffmanguitars.com, where Charlie Hoffman has a few shots of his neck setting process. It's under the Guitar Construction section. I also think www.bryankimsey.com has some photos of the "flossing the cheeks" method, as it related to a neck reset, but they are fairly similar for the final fit.

And, I know John Mayes has a neck setting dvd, although I think at least part of that video is dedicated to his special neck process (which is great, though).

Any other ideas folks? C'mon, let's help this guy out.

Bill


Bill Greene39101.5955555556

Author:  Louis Freilicher [ Fri Jan 19, 2007 1:27 pm ]
Post subject: 

Frets.com also has a lot of info on neck sets and pictures with a straightedge
on the bridge etc. I would recommend reading everything on that site when
you have the time!

Louis

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/